wireless communication terminal with GPRS/GPS/433m antenna
NOTE: THE BELOW INTROUCE USE FOR “ GSM MOBILE PHONE VERSION” AND
“GPRS WEB SERVICE VERSION”, “ GSM /GPS MOBILE PHONE VERSION” AND
“GPRS/GPS WEB SERVICE VERSION”, READER CHOOSE TO READ ACCORDING
YOUR PURCHASE REQUIREMENT!!!!
SNV series overhead type Fault Indicator system is based on the
Sensor that through CT get the (10KV-50KV) line’s current signal,
through smart computer chip by program calculating, Analysis ,judge
the short circuit or ground fault. When Sensor detect the fault
happen, then the Fault indicator warn the manager through turn red
flag, and shine red led. It is good for power managing user to find
the fault happen reason and place, then fast solve the problem and
make the power restore.
SNV Fault Indicator with the aid of the professional control
terminal equipment and Web server, it can achieve to remote read
and manage the Fault indicator state on times.
There are two channels for reading and managing the remote fault
indicators. One is through GSM mobile phone SMS command control.
Second is user computer software control. Power managing user, can
get the fault indicator information on times
Working principle and structure
Type: SNV309-communication terminal RTU
Control terminal is use for the communication between the fault
indicator , GPS satellite and web server or user GSM mobile phone.
There need insert a SIM card with GPRS and GSM function.
First, Fault indicator will auto upload information to Control
Terminal real time through 433M wireless communication..
Second, When user use mobile phone, send SMS command to control
terminal, then terminal will execute command and send Corresponding
information to user mobile phone.
Third, When the control accessed with web server, the terminal will
upload all information to web sever. User can read and manage the
all the accessed fault sensor state real time through run a
professional software on computer. Computer required connected with
Fourth, GPS Function, when the terminal put outside, then the GPS
antenna will connect with GPS satellite and terminal will get the
GPS position, longitude and latitude value.